Pigment & Resin Technology
Issue(s) available: 440 – From Volume: 1 Issue: 1, to Volume: 53 Issue: 3
Strapline:
The international journal of colorants, polymers and colour applicationsVolume 52
Volume 50
Volume 47
Volume 42
Volume 21
Volume 20
Volume 19
Volume 18
Volume 17
Volume 16
Volume 15
Volume 14
Volume 13
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Multidimensional stimulation response RTP micron fiber thin film
Junjian Lu, Hongbin Zhong, Fei LuoThe purpose of this research is as follows: DPP-BOH-PVA has been synthesized from 1,1′:3′,1″-terphenyl-5'-boronic acid (DPP-OH) and polyvinyl alcohol (PVA). The afterglow lifetime…
Natural dyeing of khadi cotton using rare earth salts as mordant with annatto extract
Padma S. Vankar, Afreen BegumReplacing conventional mordants by benign mordants, rare earth (RE) salts have been used in the process of natural dyeing with annatto seed extract. The purpose was threefold  
The history of natural dyeing and investigation of the antibacterial activity of Hibiscus sabdariffa L. on woolen fabrics
Yunus Berkli, Ayşegül Zencirkıran, Fazlıhan YılmazNatural dyeing has existed in human life from past to present. Although it lost its importance after the industrial revolution, it has started to make again a name for itself…
Investigation of the characteristics of CU2O particles obtained by a plasma-liquid process
Liliya Frolova, Olga SergeyevaThis paper aims to develop a simple and efficient plasma technology for the production of copper (I) oxide with the ability to control the morphology and size of Cu2O particles…
Preparation of fluorine and silicon modified cationic acrylic resin and its application in cathodic electrodeposition coatings
Zheqing Gong, Lijun ChenFluorinated silicon polymers are expected to be adopted in specific coatings to afford outstanding advantages, such as high chemical and photochemical resistance, low surface…
Study on barrier properties, biodegradability and antimicrobial activity of linear low density polyethylene/starch blends
Emad S. Shafik, Mena Faheem, Marwa El-Sheikh, Amira Abdalla Abdelshafy Mohamed, Seham Samir SolimanThe present work aims to prepare biocomposites blend based on linear low density polyethylene/ starch without using harmful chemicals to improve the adhesion between two phases…
Macro-micro correlation analysis of rheological characteristics for composite modified asphalt
Shuang Huang, Haitao Zhang, Tengjiang YuThis study aims to investigate the micro mechanism of macro rheological characteristics for composite modified asphalt.Grey relational analysis (GRA) was used to analyze the…
A comparative and experimental study to evaluate the use of nanocontainer solutions for removing polymeric coatingsfrom glass artifacts
Rania Abdel Gwad Eloriby, Wael Sabry Mohamed, Hamdy Mohamed MohamedThe purpose of this study is to evaluate the effectiveness of nanocontainer solutions in removing deteriorated and aged polymers commonly used in coating and consolidating…
Superhydrophobic coatings prepared from fluorinated silica nanoparticles and fluororesin: wetability, chemical stability, mechanical durability and water repellency
Pingping Hou, Zheng Qian, Meng Xin Hu, Ji Qi Liu, Jun Zhang, Wei Zhao, Xiao Li, Yong Wang, HongYan Huang, Qian Ping RanThe purpose of this study is to explore the interfacial adhesion between superhydrophobic coatings FC-X (X = 1%, 2%, 3%, 4% and 5%) and the concrete substrate, along with the…
A wide range of modified alkyd resins based on a new source of dicarboxylic acid as a binder for anticorrosive paint
Hossa F. Al-Shareef, Ahmed M. Yousif, Rafaat Eleisawy, Ammar M. Mahmoud, Hamada AbdelwahabThis paper aims to prepare alkyd protective paint by using modified alkyd with 3,6-dichloro benzo[b]thiophene-2-carbonyl glutamic acid (DCBTGA) as a source of dicarboxylic acid…
Phenoxazine-based fluorescence chemosensor for selective detection of cyanide
Huda A. Al-GhamdiA highly selective cyanide phenoxazine-based fluorescence chemosensor POH was created to detect cyanide (CN) ions.
Exploring the utilities of rice straw black liquor (Part X): biomass-derived copper (lignin/silica/fatty acids) complex as a natural antioxidant for EPDM composites (Part V)
Hoda Sabry Sabry Othman, Salwa H. El-Sabbagh, Galal A. NawwarThis study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when…
Applicability of AgNPs/GO/Na2SiO3 nanocomposite as a charged nanosorbent in the removal of cationic and anionic model dyes from water
Ali Hassanzadeh, Ebrahim Ghorbani-Kalhor, Khalil Farhadi, Jafar AbolhasaniThis study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.
Improving damping characteristics of epoxy by adding copper alloy wastes
Payman Sahbah Ahmed, Ava A.K. Mohammed, Fakhir Aziz Rasul RozhbianyThe purpose of this study is to get benefits from manufacturing harmful wastes is by using them as a reinforcement with epoxy matrix composite materials to improve the damping…
Extraction and characterization of natural dye from leaves of Lannea coromandelica and application on cotton fabric
K.G. Rumesh Samarawickrama, U.G. Samudrika Wijayapala, C.A. Nandana FernandoThe purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric…
In-situ synthesis of SiO2 aerogel/polyethylene terephthalate composite slices and their fibers
Fukang Yang, Wenjun Wang, Yongjie Yan, YuBing DongPolyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to…
Enhancing the functional properties and performance of paper via cellulose nanocrystals and funori loaded onto ZnO NPs
Salwa Moustafa Amer Mahmoud, Tarek Hamdy, Mohamed Fares, Wissam Ayman, Shrouk Muhamed, Aya Abdel Khaliq, Lilian SalahThis paper aims to investigate the ability of traditional biopolymers, such as funori or the nanoscale form of cellulose nanocrystals, to consolidate fragile paper and preserve it…
Investigation of process parameters for eco-friendly indigo dyeing of cotton fabric with reducing sugars
Quratulain Mohtashim, Salma Farooq, Fareha AsimThe application of indigo dyes in the denim industries has been criticised due to the introduction of non-renewable oxidation products into the environment. Previous studies have…
Innovations in prosthetic foot design enhancing durability, functionality and comfort through PLA composite filament 3D printing
Lara E. Yousif, Mayyadah S. Abed, Aseel B. Al-Zubidi, Kadhim K. ResanThe number of people with special needs, including citizens and military personnel, has increased as a result of terrorist attacks and challenging conditions in Iraq and other…
Advancement in extraction and characterization techniques of natural dyes from dye yielding plants sources: a review
Shilpi AggarwalEveryone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial…
Sodium and potassium ferrocyanide derived Prussian blue pigment
Malav R. Sanghvi, Karan W. Chugh, S.T. MhaskeThis study aims to synthesize Prussian blue {FeIII4[FeII(CN)6]3} pigment by reacting ferric chloride with different ferrocyanides through the same procedure. The influence of the…
Designing an optimised formulation for in situ emulsion polymerization: printing ink production by response surface methodology
Bahareh Babaie, Mohsen Najafi, Maryam AtaeefardToner is a crucial dry colorant composite used in printing based on the electrophotographic process. The quality of printed images is greatly influenced by the toner production…
Consolidation materials used with illuminated and non-illuminated paper manuscripts and historical leather bindings: a review
Mostafa Abdel-Hamied, Ahmed A.M. Abdelhafez, Gomaa Abdel-MaksoudThis study aims to focus on the main materials used in consolidation processes of illuminated paper manuscripts and leather binding.
Harnessing of carboxy containing starch nanoparticles as an adsorbent for Cd (II) ions and methylene blue from waste water effluent: synthesis, metrological characterization and properties
Khaled Mostafa, Azza El-SanabaryThe novelty addressed here is undertaken by using tailor-made and fully characterized starch nanoparticles (SNPs) having a particle size ranging from 80 to 100 nm with a larger…
Green encapsulation of textile dyes using lecithin to increase dyeing performance
Shimaa S.M. Elhadad, Hany Kafafy, Hamada Mashaly, Ahmed Ali El-SayedThe purpose of this study is to use liposome technology in the treatment of fabrics textiles because of its efficient energy saving, reducing time and temperature.
Investigation of the effects of self-crosslinking acrylate with TiO2 nanoparticles on cotton denim fabrics
Sabiha Sezgin BozokTitanium(IV) oxide nanoparticles (TiO2 NP) were deposited to cotton denim fabrics using a self-crosslinking acrylate – a polymer dispersion to extend the lifetime of the products…
Fabrication of thermal insulation sodium alginate/SiO2 composite aerogel with superior radiative cooling function for firefighting clothing
Qing Jiang, Yuhang Wan, Xiaoqian Li, Xueru Qu, Shengnan Ouyang, Yi Qin, Zhenyu Zhu, Yushu Wang, Hualing He, Zhicai YuThis study aims to evaluate the thermal performance of sodium alginate (SA) aerogel attached to nano SiO2 and its radiative cooling effect on firefighting clothing without…
Preparation and performance of self-healing polymer cement-based waterproof coating with ion chelator
Linghuan Li, Shibin Sun, Ronghua Zhuang, Bing Zhang, Zeyu Li, Jianying YuThis study aims to develop a polymer cement-based waterproof coating with self-healing capability to efficiently and intelligently solve the building leakage caused by cracking of…
Experimental exploration of mechanical behaviour of graphene oxide blend polymer nanocomposites
Manikandaraja G., Pandiyarajan R., Vasanthanathan A., Sabarish S.This study aims to evaluate the development of composites made of epoxy (E) resin with different weight percentages of polypropylene (PP) and graphene oxide (Go) to form…
Sustainable cotton dyeing with reactive dyes in the recycled dyeing wastewater
Dawu Shu, Shaolei Cao, Yan Zhang, Wanxin Li, Bo Han, Fangfang An, Ruining LiuThis paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts.
Effect of isobornyl acrylate and hexanediol diacrylate on the properties of UV-curable resin developed from suberic acid-derived polyester polyol
Umesh Mahajan, S.T. MhaskeThis study aims to focus on how reactive diluents with mono- and di-functionalities affect the properties of resin formulation developed from bioderived precursors. A hydroxyethyl…
New insights into the role of color extraction from (Aegle Marmelos leaf) using a non-traditional heating source
Nancy Sobh, Nagla Elshemy, Sahar Nassar, Mona AliDue to herbs and plants’ therapeutic properties and simplicity of availability in nature, humans have used them to treat a variety of maladies and diseases since ancient times…
Synthesis of polymer-based antiviral coating using polyethylene glycol (PEG) and acrylic resin as binder
Reasmy Raj, Amirul Syafiq, Vengadaesvaran Balakrishnan, Shakeel Ahmad, Nasrudin Abd Rahim, Pouya Hassandarvish, Sazaly Abu Bakar, A.K. PandeyThis paper aims to fabricate a polymer-based polyethylene glycol (PEG) coating with acrylic resin as a binder that can show antiviral activity against the feline coronavirus…
Use of carboxymethyl cellulose, Klucel G, gum Arabic and zinc oxide nanoparticles nanocomposite as strength agents for inked papyrus
Bataa Sayed Mohamed Mazen, Badawi Mohamed Ismail, Rushdya Rabee Ali Hassan, Mahmoud Ali, Wael S. MohamedThe purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost…
Embedding anatase, rutile, and brookite TiO2 nanoparticles to cotton fabric with epoxy silane and comparison of their effects on photodegradation
Sabiha Sezgin BozokThis study aims to embed anatase, rutile and brookite TiO2 nanoparticles (NPs) with different crystal phases into cotton fabrics by epoxy silane and to examine the effect of these…
Multifunctional finishes on photochromic microcapsule-printed cotton fabrics using titanium oxide nanoparticles
Gobikannan Tamilmani, Venkhatesan D., Santhosh P., Tamilselvan M., Suryappa Jayappa Pawar, Amin Hirenbhai NavinbhaiThis paper aims to study the combination of photochromic microcapsules, which use the ultraviolet (UV) rays for colour changing phenomena, and titanium oxide (TiO2) nanoparticles…
Preparation of polysulfone/sulfonated polysulfone-SiO2 nanofiltration membrane and its performance characterization
Liangbin Chen, Lihong Zhao, Keren Ding, Kaibo Xu, Xianzhe TangThis study aims to optimize the preparation conditions and modify the nanofiltration (NF) membranes to prepare high-performance polysulfone/sulfonated polysulfone composite…
Investigation of TiO2 replacement alternatives for water-based paints using styrene butyl acrylate
Seda Aygül, Serkan Yılmazsönmez, Arzu Soyalp, Ayse AytacTitanium dioxide (TiO2) has high opacity, high brightness and whiteness, owing to its high refractive index value. It is mainly used in the coating industry and continuous efforts…
Preparation of BiOBr/PVDF photocatalytic membranes for long-term and efficient degradation of organic dyes using phase transition and in situ deposition methods
Dong Chen, Rui Zhang, JiaCheng JiangThis study aims to investigate the morphology and physicochemical properties of BiOBr/Polyvinylidene fluoride (PVDF) composite membranes and the differences in the properties of…
Dyeing of silk with extract from Coreopsis tinctoria
Junling Wu, Longfei Sun, Long LinThis study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve…
Effect of an amine-aldehyde condensate modifier on the thermal and mechanical properties of fiber-reinforced epoxy composites
Goutam Kumar Jana, Sumit Bera, Ribhu Maity, Tithi Maity, Arjun Mahato, Shibayan Roy, Hemakesh Mohapatra, Bidhan Chandra SamantaThe manufacture of polymer composites with a lower environmental footprint requires incorporation of sustainably sourced components. In addition, the incorporation of novel…
An amperometric sensor based on gamma-irradiated PANI-ZnO-NiO nanocomposite thin films for Escherichia coli detection in water
Huda Abdullah, Norshafadzila Mohammad Naim, Kok Seng Shum, Aidil Abdul Hamid, Mohd Hafiz Dzarfan Othman, Vidhya Selvanathan, Wing Fen Yap, Seri Mastura MustazaRegular monitoring of bacteria, especially Escherichia coli, in wastewater is crucial to ensure the maintenance of public health. Amperometric detection proves to be a fast…
Comparison of life cycle assessment for wooden pallet and different plastic pallets based on SimaPro
Fenjuan Shao, Qingbin CuiThe study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain…
Development of protective coating system using natural rubber – acrylic polyol resin for mild steel
Monapriya Naidu Kerinasamy Naidu, Iling Aema Wonnie Ma, Sachin Sharma Ashok Kumar, Vengadaesvaran Balakrishnan, Ramesh Subramaniam, Ramesh KasiThe purpose of this study is to develop a protective coating system on mild steel panel incorporating epoxidized natural rubber with acrylic polyol resin.
Synthesis and adsorption performance of temperature-sensitive imprinted composite poly (vinylidene fluoride) resin membranes with chitosan modification for selective separation of ReO4−
Wan Xu, Xinsheng Liu, Huijuan Zhang, Ting Huo, Zhenbin Chen, Yuan SunThis study aims to prepare an imprinted composite membrane with grafted temperature-sensitive blocks for the efficient adsorption and separation of rhenium(Re) from aqueous…
Lignosulfonate and glycidyl ether modified urea formaldehyde wood adhesives for interior particleboard production
Ümran Burcu Alkan, Nilgün Kızılcan, Başak BengüThe purpose of this study is the development of sustainable and low-formaldehyde emission wood adhesive formulations.
An experimental study for using nano-alumina to improving mechanical properties of epoxy resin for assembling glass artifacts
Rania Abdel Gwad Eloriby, Hamdy Mohamed MohamedThis study aims to assess the efficacy of nano-alumina (nano-Al2O3) in improving the performance of epoxy adhesives used to assemble archaeological glass. The conservators face a…
Harnessing the potential of regenerated bamboo knitted fabrics in development of eco-friendly masks
Fareha Asim, Farhana Naeem, Shenela NaqviFace masks are the most recommended precautionary measure since the emergence of SARS-CoV-2 since 2020 and the most useful PPE against this virus and its variants so far. This…
Study on photoluminescence of integrated nano-calcium carbonate (CaCO3) enhanced with dysprosium (Dy) doped calcium borophosphate (CBP) phosphor
Khishn Kumar Kandiah, Vengadaesvaran Balakrishnan, Amirul Syafiq, Nasrudin Abd Rahim, Adarsh Kumar Pandey, Yee Seng Tan, Sanjay J Dhoble, Ramesh Kasi, Ramesh SubramaniamThere is a strong inducement to develop new inorganic materials to substitute the current industrial pigments, which are known for their poor ultraviolet absorbent and low…
Preparation and dispersion properties of polyacrylate copolymer dispersant
Xia Sun, Jianben Xu, Caili Yu, Faai ZhangThe purpose of this paper is to synthesize a polyacrylate-based dispersant with a determined target molecular weight for oily systems and to determine the optimal dispersant level…
Multiresponse optimization in amylolytic desizing of viscose fabric in the copresence of ferrous ions and an anionic surfactant
Zulfiqar Ali Raza, Aisha Rehman, Faiza Anwar, Naseer AhmadThis study aims to investigate the effect of the copresence of ferrous (Fe2+) ions and sodium dodecyl sulfate (SDS) on the activity of an amylase enzyme during the desizing of…
Synthesis of monoazo disperse dyes derived from N-(1-phthalimidyl)-naphthalimides and their dyeing properties on polyester fabrics
Ukanah Suleiman Pendo, Kasali Ademola Bello, Mohammed Kabir Yakubu, Abdulraheem Giwa, Umar Salami Ameuru, Ali Reza Harifi-Mood, Azim Ziyaei HalimehjaniThis paper aims to synthesize a novel series of monoazo disperse dyes based on N-(1-phthalimidyl)-naphthalimides by coupling with substitute anilines, naphthylamines and naphthol…
Adsorptive investigation of the anticorrosion properties of natural chrysin on carbon steel in acid–chloride system: combined theoretical and experimental approach
Wilfred Emori, Paul C. Okonkwo, Hitler Louis, Ling Liu, Ernest C. Agwamba, Tomsmith Unimuke, Peter Okafor, Atowon D. Atowon, Anthony Ikechukwu Obike, ChunRu ChengOwing to the toxicity, biodegradability, and cost of most corrosion inhibitors, research attention is now focused on the development of environmentally benign, biodegradable…
Natural and synthetic drugs as eco-friendly and sustainable corrosion inhibitors for metals: a review
Chigoziri N. Njoku, Temple Uzoma Maduoma, Wilfred Emori, Rita Emmanuel Odey, Beshel M. Unimke, Emmanuel Yakubu, Cyril C. Anorondu, Daniel I. Udunwa, Onyinyechi C. Njoku, Kechinyere B. OyohCorrosion is a major concern for many industries that use metals as structural or functional materials, and the use of corrosion inhibitors is a widely accepted strategy to…
Role of intra-ply hybridization and nano reinforcement on crack growth of epoxy
Payman Sahbah AhmedEpoxy resins are widely used in a variety of engineering applications, including composite wind turbine blades used in the renewable energy industry, highly complex structural…
Studying the properties of polypyrrole-montmorillonite polyacrylic-urethane nanocomposite coatings: the role of an eco-friendly ionic liquid
Reza Amini, Pooneh KardarThis paper aims to achieve an anti-corrosive coating via uniform dispersion of nanoclay particles (montmorillonite) and polypyrrole (PPy) as a conductive polymer as well as their…
Improving the properties of gap-filling materials for pottery artifacts with nano silica and nano kaolinite polymeric nanocomposites
Hamdy Mohamed Mohamed, Wael Sabry MohamedThe study aims to assess the efficiency of nanocomposite to improve the properties of gap-filling materials for pottery artifacts.
Preparation of alcohol-resistant ink using polyester resin for thermal transfer ribbon
Yuanhao Yang, Guangyu Chen, Zhuo Luo, Liuqing Huang, Chentong Zhang, Xuetao Luo, Haixiang Luo, Weiwei YuThe purpose of this study is to prepare thermal transfer ribbons with good alcohol resistance.
Using nano clay and graphite as low-cost, sustainable adsorbents to remove dye toxins from waste water
Nagla Elshemy, Hamada Mashaly, Shimaa ElhadadThis study aims to observe the coloring efficacy of graphite (G) and nano bentonite clay (BCNPs) on the adsorption of Basic Blue 5 dye from residual dye bath solution.
Synthesis, metrological characterization, and dyeing properties of surface grafted viscose fabric using peroxydisulfate/ferrous II ions redox pair
Khaled Mostafa, Nader Abdelaziz, Azza El-SanabaryThe purpose of this study is to undertake surface graft copolymerization of viscose fabric via altering its fibrous properties by using acrylic acid (AA) as a carboxyl-containing…
Development of imine-azo-dyes derived from vanillin and salicylaldehyde for pH-sensing in smart packaging
Siddhesh Umesh Mestry, Vardhan B. Satalkar, S.T. MhaskeThis study aims to describe the design and synthesis of two novel azo and imine chromophores-based dyes derived from two different aldehydes with intramolecular colour matching…
Synthesis of butylated benzo-amino resin by solid formaldehyde one-step-two-stage method and its application in high solid content coatings
Xingbing Yang, Xinye Wang, Shuang Huang, Xin Liu, Xiang Huang, Ting LeiIn this study, solid formaldehyde, benzoguanamine and butanol were used to synthesize butylated benzo-amino resin by one-step-two-stage method.
Analytical methods for evaluating the state of preservation of a historical manuscript dating back to the 15th century AD in Al-Azhar Library – Egypt
Gomaa Abdel-Maksoud, Hanaa Nasr, Sayed Hussein Samaha, Mahmoud Saad ELdeen KassemThis study aims to evaluate the state of preservation of one of the most famous manuscripts dated back to the 15th century using some analytical techniques to identify the…
Quasiperiodic graph model of rubber elasticity in double-network gels undergoing mechanochemical coupling
Aying Zhang, Ziyu Xing, Haibao LuThe purpose of this paper is to study the mechanochemical effect and self-growth mechanism of double-network (DN) gel and to provide a quasiperiodic model for rubber elasticity.
New nutrients evaluation in Spirulina maxima growth for phycocyanin, carbohydrate, and biochar production
Lucas Ioran Marciano, Guilherme Arantes Pedro, Wallyson Ribeiro dos Santos, Geronimo Virginio Tagliaferro, Fabio Rodolfo Miguel Batista, Daniela Helena Pelegrine GuimarãesThe purpose of this study is to investigate the influence of light intensity and sources of carbon and nitrogen on the cultivation of Spirulina maxima.
Fabrication of CNTs-reinforced poly(vinyl alcohol) nanocomposite film with tailored structural, surface chemical and optical properties
Abdul Lateef, Zulfiqar Ali Raza, Muhammad Aslam, Muhammad Shoaib Ur Rehman, Asma Iftikhar, Abdul ZahirThis study aims to fabricate multiwalled carbon nanotubes (MWCNTs)-mediated polyvinyl alcohol (PVA) composite films using the solution casting approach.
Citric-acid anchored silver nano-finishing of commercially dyed denim fabric for potential non toxic antibacterial surgical gowns
Saima Habib, Zulfiqar Ali Raza, Farzana Kishwar, Sharjeel AbidPresent study aimed to nanosilver-treat some commercially dyed denim fabric using an eco-friendly cross-linker of citric acid for possible application in the fabrication of…
Physicochemical characterization of titanium dioxide inks for digital textile printing based on newly developed polyurethane prepolymers
M. Hassanein, M. Abd El Rahm, H. M. Abd El Bary, H. Abd El-WahabThis paper aims to study the physical and chemical characteristics of inkjet titanium dioxide inks for cotton fabric digital printing.
Preparation of cool composite pigment by the layer-by-layer assembling of phthalocyanine green on the surface of rutile TiO2
Lingyun Cao, Shuaibin Ren, ZhengHao Zhou, Xuening Fei, Changliang HuangThis study aims to fabricate a cool phthalocyanine green/TiO2 composite pigment (PGT) with high near-infrared (NIR) reflectance, good color performance and good heat-shielding…
Synthesis of modified poly(ester-amide) and alkyd resins based on phenolic and Schiff base compounds to study their biological and insecticide activity for surface coating applications
Roma G. Elfadel, Hala M. Refat, H. Abdelwahab, Salem S. Salem, Mohamed A. Awad, M.A.M. Abdel ReheimThis paper aims to investigate the prepared modified alkyd and poly(ester-amide) (PEA) resins as antimicrobial and insecticide binders for surface coating applications.
Hygroscopic analysis and tribo-mechanical characterization of biocompatible PP/PA6/Boron sesquioxide composite
Kawaljit Singh RandhawaThe purpose of this study is to look into the hygroscopic and tribo-mechanical properties of a polypropylene/polyamide-6 (PP/PA6) blend and a PP/PA6/Boron sesquioxide composite.
Isolation and chemistry of plant pigments
Pankaj Naharwal, Mahesh Meena, Charul Somani, Neetu Kumari, Dinesh Kumar YadavThis paper aims to critically review the isolation and chemistry of plant pigments.
Preparation and characterization of PSF/SPSF blended ultrafiltration membranes
Liangbin Chen, Lihong Zhao, Keren DingThis paper aims to improve the permeability and antifouling of polysulfone (PSF) ultrafiltration membranes, the PSF matrix was modified by incorporating sulfonated polysulfone…
Sustainable technique of dyeing bio-degradable polyester using henna extract
Hammama Irfan, Tahreem Beg, Farhana Naeem, Mohammad Irfan, Shenela Naqvi, Yang ShengyuanThe purpose of this study is to highlight the threats related to the utilization of synthetic fibers. Volatile organic compounds, particulates and acid gases are released during…
Modelling of Basic Yellow 28 adsorption onto activated carbon: batch and continuous process
Zeliha Betül Kol, Dilek DuranoğluThis study aims to model and investigate Basic Yellow 28 (BY28) adsorption onto activated carbon in batch and continuous process.
The role of resin in optimizing the performance and printing properties of water-based inkjet inks for food packaging
Aniela Kusber, Rafał Józef Gaida, Katarzyna Dziubek, Marian WitThis study aims to investigate the influence of commercially available resins in water-based magenta pigment inkjet ink formulations on the properties of ink printability and the…
Study of transmission and reflection of hydrophilic transparent nano-titanium dioxide coating
Amirul Syafiq, Lilik Jamilatul Awalin, Syukri Ali, Mohd ArifThe paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create…
Comparison of life cycle assessment for takeout meal packaging (kraft paper bowl and plastic bowl) based on Simapro
Fenjuan Shao, Qingbin CuiThis study aims to compare and analyze the impact of the commonly used takeout packing (Kraft paper bowl and plastic bowl) through life cycle assessment, then certain suggestions…
The effect of cold glow discharge nitrogen plasma treatment of sisal fiber (Agave Sisalana) on sisal fiber reinforced epoxy composite
Upendra S. Gupta, Sudhir Tiwari, Uttam SharmaThe incompatibility of natural fibers with polymer matrices is one of the key obstacles restricting their use in polymer composites. The interfacial connection between the fibers…
Identification of natural dyes with halochromic properties and their potential use as food spoilage indicators
Hafsat T. Rumah, Mansur B. Ibrahim, Sani M. GumelThe purpose of this research is to identify and investigate some natural dyes with halochromic properties for potential use as food spoilage indicators to reduce waste and curve…
Eco-friendly polyfunctional ceramic pigments: an approach
Guillermo Monrós, Mario Llusar, José Antonio BadenesThe purpose of this study is the synthesis and characterization of a CMYK palette (cyan of Cr-BiVO4, magenta of Pr-CeO2, yellow of Bi-(Ce,Zr)O2 composite and black of YMnO3) as an…
Citrate-crosslinked silver nanoparticles impregnation on curcumin-dyed cellulose fabric for potential surgical applications
Saima Habib, Farzana Kishwar, Zulfiqar Ali Raza, Sharjeel AbidThis study aims to present a sustainable approach in the natural dyeing of cellulose fabric followed by nanosilver finishing through a green crosslinker of citric acid for…
Evaluating nano Primal AC33 for protection and consolidation processes of archaeological pottery: a comparison study with silica and montmorillonite nanoparticles
Hamdy Mohamed Mohamed, Wael Sabry MohamedThis study aims to offer an effective nanocomposite for potential use to consolidate and protect deteriorated archaeological pottery.
Synthesis of transparent thermal insulation coating for efficient solar cells
Amirul Syafiq, Farah Khaleda Mohd Zaini, Vengadaesvaran Balakrishnan, Nasrudin Abd. RahimThe purpose of this paper is to introduce the simple synthesis process of thermal-insulation coating by using three different nanoparticles, namely, nano-zinc oxide (ZnO)…
Extraction and identification of anthocyanin from blueberries: effects of ultrasound-/microwave-assisted parameters
Qi Yang, ZhiQiang Feng, RuanBing Zhang, YunPu Wang, DengLe Duan, Qin Wang, XiaoYu Zou, YuHuan LiuThis study aims to develop a green, economical and efficient ultrasonic-/microwave assisted extraction (UMAE) process for the extraction of anthocyanins.
Evaluation of the aminosilane and colloidal silica treated red iron oxide pigment effects in styrene acrylic and polyurethane dispersion
Mehmet Ozdemir, Serap Mert, Ayse AytacThis study aims to perform the surface treatment of synthetic α-Fe2O3 red iron oxide pigment with hydrolysate 3-aminopropyl silane (A) and colloidal silica (CS) and investigate…
Durability and wettability of varnishes on the modified and aged surfaces of short rotation teak wood
Efrida Basri, Resa Martha, Ratih Damayanti, Istie Rahayu, Wayan Darmawan, Philippe GérardinThe surface characteristics of thermally and chemically modified wood, such as surface roughness, surface free energy (SFE) and wettability, are important properties that…
Synthesis and characterization of vanillin derived bio-based benzoxazine resin for high temperature application
Dhananjay A. Patil, Vidhukrishnan Ekambaram Naiker, Ganesh A. Phalak, Karan W. Chugh, S.T. MhaskeThis study aims to synthesize two different benzoxazines (Bz) monomers using bio-based and petroleum-based primary amines, respectively, and they have been compared to study their…
Natural dyeing of silk and jute fabric with the aqueous extract of coconut leaves – an eco-friendly approach
Shahin Hossain, M. Abdul Jalil, Rois Uddin Mahmud, Abdul KaderIn recent years, natural dyes have attracted significant attention globally because of growing public awareness of the environment and health hazards associated with synthetic…
Evaluation of the anti-erosion performance of PLA and ABS materials with two different micro textures
Ripendeep Singh Sidhu, Gurmeet Singh, Harjot Singh GillThis empirical study aims to investigate the erosion wear performance of two different 3D-printed materials (acrylonitrile butadiene styrene [ABS] and polylactic acid [PLA]) with…
Coatings containing molybdenum trisulphide QDs to protect oil paintings against different environmental factors
Eslam Taha, Mostafa Attia Mohie, Mahmoud Sayed Korany, Naglaa Aly, Alaa Ropy, Mosaad NegemThis study aims to investigate profoundly the protection of oil painting from deterioration using molybdenum trisulphide quantum dots (MoS3 QDs) against microbe, dirt accumulation…
Effects of precipitated and ground calcium carbonate coating on mechanical properties of fluting paper
Mustafa Çiçekler, Velican Üzüm, Emrullah ÇopurkuyuThe purpose of this study is to investigate the effects of a pigment coating on the mechanical properties of fluting paper.
A state-of-the-art review on advanced ceramic materials: fabrication, characteristics, applications, and wettability
Kawaljit Singh RandhawaThe purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and…
Investigation of deinking efficiencies of trigromi laserjet printed papers depending on the number of recycling
Ufuk YılmazThis study aims to determine the ink removal efficiency of papers with different recycling numbers and to examine some electrophotographic printing properties.
Glucose-lignin-based phenolic resin: an environmentally friendly low-formaldehyde wood adhesive
Kaiyan Yang, Xiaowu Gong, Lanli Bai, Yun Zhang, Na ZhouThis study aims to prepare a low-formaldehyde and environmentally friendly glucose-lignin-based phenolic resin.
Harnessing of newly tailored poly (acrylonitrile)-starch nanoparticle graft copolymer for copper ion removal via oximation reaction as a calorimetric sensor
Khaled Mostafa, Heba Ameen, Amal El-Ebeisy, Azza El-SanabaryHerein, this study aims to use our recently tailored and fully characterized poly acrylonitrile (AN)-starch nanoparticle graft copolymer having 60.1 graft yield percentage as a…
Natural dyeing mediated by atmospheric air pressure plasma treatment of polyester
Padma S. Vankar, Archana GangwarThe purpose of this study is to check the effectivity of plasma in the natural dyeing of polyester fabric using four natural dyes – Turkey red, Lac, Turmeric and Catechu using…
Organic silicone-modified waterborne epoxy coatings using aqueous curing agents technology
Xinyan Lv, Yisheng Liang, Jiang Zhong, Haifeng HeThe silicone modifications of two-component epoxy resin coatings are commonly built on epoxy resins rather than on epoxy curing agents. The silicone-modified epoxy curing agent…
Corrosion inhibition of aluminium in 0.3 M HCl using starch mucor in potassium iodide as inhibitor
Uchenna Luvia Ezeamaku, Innocent Eze, Nkiru Odimegwu, Angela Nwakaudu, Amarachukwu Okafor, Okechukwu Dominic Onukwuli, Ikechukwu Abuchi NnanwubeThe purpose of this study is to investigate starch mucor (SM) in potassium iodide (KI) as corrosion inhibitor of aluminium in hydrochloric acid (HCl) medium.
Anti-corrosive agents based benzil-thiocarbohydrazone macrocyclic ligand-derived Cu (II) and Zn (II) chelates: template synthesis and physically admixing with epoxy coating
Walid E. Elgammal, Essam M. Eliwa, Hosni A. Goomaa, Medhat E. Owda, H. Abd El-WahabThis paper aims to focus on the synthesis of the macrocyclic complexes (Cu and Zn) and their applications as anticorrosive materials in epoxy paint formulation for surface coating…
Cobalt-containing diopside pigments based on granulated blast furnace slag
Аleksandr Viktorovich Zaichuk, Аleksandra Andreevna Amelina, Yurii Sergeevich HordieievThe purpose of this study was to the low-temperature synthesis of cobalt-containing diopside pigments based on granulated blast furnace slag and to study the characteristics of…
Structural color printing and evaluation based on 3D printing
Jundong He, Xinguang LvThe purpose of this study is to modify the FDM 3D printer to print with polystyrene (PS) microspheres as the printing material, thus enabling bottom-up structural color printing…
TiO2/PDMS hybrid system for constructing superhydrophobic surfaces of cotton fabrics with resistance to droplet adhesion
Wei Zhang, Chentao Liu, Jiming Yao, Shuangshuang LiThis study aims to produce a superhydrophobic fabric surface with a layered rough structure and which are resistant to droplet adhesion. Polydimethylsiloxane (PDMS) systems doped…
Eco-friendly tiles: fabrication and testing of composite tile made from industrial gypsum wastes
Emad S. Shafik, Nehad N. Rozik, Nadia F. Youssef, Salwa L. Abd-El-MessiehThe purpose of this study is to utilize two types of gypsum mold wastes from two different factories as novel and economical reinforcing fillers for composites that may be useful…
Partial replacement of silica by naturally occurring pumice powder for enhancing mechanical and thermal properties of nitrile rubber cured by electron beam irradiation
Khaled F. El-Nemr, H. Radi, Reham H. HelalOne of the low-cost minerals that can be used as reinforcing filler in polymer industry is pumice powder. Pumice is a highly porous volcanic glass formed during explosive…
Preparation of epoxy-based silicone prepolymers with applications in UV-curable coatings
Fuping Bian, Shudong LinThis paper aims to investigate the effects on coatings performance in the epoxy silicone resin system owing to the existence of the different chain length of open-chain epoxy…
Effect of CaCO3 and compatibilizer SMA-2025 on the property of CaCO3/PLA/PBAT shape memory composites
Laiming Yu, Yaqin Fu, Yubing DongThe purpose of this study is to improve the mechanical property and processing performance and reduce the cost of the polylacticacid/polybutyleneadipate-co-terephthalate(PLA/PBAT…
Highly efficient elimination of uranium (VI) and thorium (IV) from aqueous solution using activated carbon immobilized on polystyrene
O.A. Elhefnawy, A.A. ElabdThe purpose of this study is to prepare a new adsorbent activated carbon immobilized on polystyrene (ACPS) for uranium (VI) and thorium (IV) removal from an aqueous solution…
Synthesis, optical properties and DFT-TDDFT computational study of phenothiazine dye: donor-acceptor molecules
Fatimah A.M. Al-ZahraniThe purpose of this study aims to synthesize a novel donor–acceptor dye based on phenothiazine as a donor (D) and nonconjugated spacer was devised and synthesized by condensing of…
Harnessing of low-temperature nitrogen plasma technique as an eco-friendly approach for dye-ability of cotton fabric with acid dye
Khaled Mostafa, Heba Ameen, Ahmed MedhatThe purpose of this paper is to generate nitrogen-containing groups in the cotton fabric surface via low-temperature nitrogen plasma as an eco-friendly physical/zero-effluent…
Corrosion resistance of graphene/basalt flake modified waterborne epoxy zinc-rich primer
Xiao Wang, Xuan Liang, Bo Wang, Chang-qing Guo, Shan-gui Zhang, Kai Yang, Shi-ya Shao, Yan Sun, Zheng Guo, Xue-yan Yu, Donghai Zhang, Tai-jiang Gui, Wei Lu, Ming-liang Sun, Rui DingThe purpose of this study is to evaluate the effect of graphene, basalt flakes and their synergy on the corrosion resistance of zinc-rich coatings. As the important heavy-duty…
Design, characterization, theoretical studies, and dyeing properties of new novel diazo salicylaldehyde Schiff base catalyzed with ceric (IV) ammonium nitrate (CAN) as an eco-friendly catalyst
Ali A. Ali, H. Abd El-Wahab, Moustafa S. Abusaif, Ahmed Ragab, Omar A. Abdel-Jaid, E.A. Eldeeb, Yousry A. AmmarThe paper aims to the preparation of novel disperse dye based on azo salicylaldehyde derivatives TF-A [2-hydroxy-5-((3-(trifluoromethyl)phenyl)diazenyl)benzaldehyde] and full…
Evaluation of natural oil polyol hydrophobic acrylic-based coating incorporated with SiO2 nanoparticles for enhanced corrosion protection
Iling Aema Wonnie Ma, Gerard Ong, Ammar Shafaamri, Julie Nabilah Jamalludin, Nina Nazirah Ishun, Ramesh Kasi, Ramesh SubramaniamThis study aims to fabricate the acrylic-based polymeric composite coating with a hydrophobic surface associated with natural oil polyol (NOP) and polydimethylsiloxane with the…
The encapsulation efficiency of zircon pigments from robust solids to clear solutions
Shan Peng, Ranran Yang, Binglong Lei, Yun Gao, Renhua Chen, Xiaohong Xia, Kevin P. HomewoodThis paper aims to systematically demonstrate a methodology to determine the relative and absolute encapsulation efficiencies (αRe and αAb) for thermally- and chemically-robust…
Color change kinetics of lac dye as influenced by some food spoilage metabolites: validation for spoilage monitoring of strawberries
Priyanka Sakare, Saroj Kumar GiriThe purpose of this paper was to study the color change kinetics of lac dye in response to aldehydes, carbon dioxide and other food spoilage metabolites for its potential…
Citric acid-crosslinked nanosilver finishing of indigo-dyed denim for potential surgical gowns
Saima Habib, Zulfiqar Ali Raza, Farzana Kishwar, Sharjeel AbidThis paper aims to develop an indigo-dyed denim fabric treated with a nanosilver colloid in the presence of a natural crosslinker of citric acid for possible surgical gown…
Design and synthesis of thermosensitive target segment resin with precisely controlled distance between immobilization sites for immobilization of penicillin G acylase
Yangdong Liu, Siyuan Lu, Hongyi Tu, Boyuan Zhang, Yaqin Zhao, Jiasheng He, Liangliang He, Zhenbin ChenTo save the economic cost and improve the performance of enterprises, this study aims to synthesize high performance immobilized penicillin G acylase (PGA) carriers with fast…
A comparative study of corrosion resistance of epoxy-based coating incorporated chitosan, silica and hybrid compound of chitosan/silica on mild steel
Iling Aema Wonnie Ma, Sachin Sharma Ashok Kumar, Ramesh Kasi, Ammar Shafaamri, Ramesh SubramaniamThis study aims to propose that the corrosion resistance of the neat epoxy coating can be further enhanced by incorporating reinforcing agents.
Eco-friendly polymer composite films based on waste polyvinyl chloride/sunflower seed cake for antimicrobial and antistatic applications
Mona Saied, Abeer Reffaee, Shimaa Hamieda, Salwa L. Abd- El- Messieh, Emad S. ShafikThis study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different…
ISSN:
0369-9420Online date, start – end:
1972Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Long Lin