Table of contents
Corrosion effects on the electrical performance of silver metal contacts
Panayota Vassiliou, Constantine T. DervosIn this work, commercial silver metal contacts welded on top of silver plated brass or brass substrates have been exposed to air rich in NaCl. Scanning electron microscopy and…
Can liquid crystalline polymers find application in the field of protective coatings?
Cosimo Carfagna, Marta Giamberini, Eugenio AmendolaGlycidyl terminated rigid‐rod monomers can be cured in a liquid crystalline state. The resulting thermoset offers high potential as protective coating thanks to its outstanding…
Recent advances in epoxy curing agent technology for low temperature cure coatings
Kalyan Ghosh, Patricia Garcia, Ernest GalgociReports results from studies conducted on a polyfunctional amine adduct epoxy curing agent (EPI‐CURE DPC‐3293) as a means to design low temperature cure coatings. Through the…
Mechanism of inhibition of corrosion of mild steel by polyacrylamide, phenyl phosphonate and Zn2+
Susai Rajendran, B.V. Apparao, N. PalaniswamyThe formulation consisting of 50ppm polyacrylamide (PAA), 300ppm phenyl phosphonic acid (PPA) and 50ppm Zn2+ has 95 per cent inhibition efficiency in controlling corrosion of mild…
Corrosion behaviour of electrodeposited Ni‐Mn alloys ‐ electrochemical impedance measurements
A. Stephen, M.V. Ananth, V. RavichandranNi‐Mn alloys were electrodeposited on mild steel substrates from sulphate baths. Their corrosion behaviour was evaluated in 3 per cent NaCl with electrochemical impedance…
TWI: corrosion, welds and pipelines
Stuart BondTWI was established in 1946 as the BWRA, later The Welding Institute, and from its very outset was focused on the study of joining technology and its impact on the performance and…
ISSN:
0003-5599Online date, start – end:
1954Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Yu Yan